Whirlpool W10115226B 用户手册

下载
页码 20
19
Reverse Door Swing  
(models with side-swing doors with glass)
Place towel on dryer
1.
Place towel on top of dryer to avoid damaging the surface.
Lift door until top screws in dryer cabinet are in large part of 
hinge slot. Pull door forward off screws. Set door (handle side 
up) on top of dryer. Remove top screws from dryer cabinet.
lift door off top screws
3.
Remove bottom screws
2.
Open dryer door. Remove bottom screws from dryer cabinet 
side of hinges. Loosen (do not remove) top screws from dryer 
cabinet side of hinges.
Remove screws at top, bottom, and side of door (4 screws). 
Keep door screws separate from hinge screws as they are 
different sizes.
Remove screws from door
6.
Remove screws attaching hinges to door.
Remove screws from hinges
4.
Flip door over
5.
Flip door over so handle side is down. 
Holding door over towel on dryer, pry inner door and lift to 
separate it from outer door. 
noTE: Do not pull on door seal or plastic door catches.
Separate inner from outer door
7.