Brady 2461 用户手册
66
Advanced Entry Calibration (continued)
Step
Operator Action
Displayed Message
Comment
6
Press the
key
to scroll to ‘Advanced
Entry’.
Entry’.
You are entering
Advanced Entry
Calibration.
Calibration.
7
Press the
key.
Press the
key to abort this
key to abort this
procedure.
8
Press the
key.
You are beginning
the Advanced
Entry Calibration.
the Advanced
Entry Calibration.
9
Press the
key.
Place the label under the
Sensor Eye Mark and
lower the printhead
assembly.
Sensor Eye Mark and
lower the printhead
assembly.
-OR-
If using preprinted
media, ensure the
label area under
the sensor is free
of preprinted text,
graphics or
borders.
media, ensure the
label area under
the sensor is free
of preprinted text,
graphics or
borders.
10
Press the key
to select the setting
(denoted by an ‘*’) and
then record the sensor
reading (the ‘yyy’ value)
in a table similar to the
one shown after Step 12,
as a Label Value.
to select the setting
(denoted by an ‘*’) and
then record the sensor
reading (the ‘yyy’ value)
in a table similar to the
one shown after Step 12,
as a Label Value.
Next, press the
key to increment the
Gain Number.
key to increment the
Gain Number.
Repeat this step for each
of the Gain Numbers
(00-32).
of the Gain Numbers
(00-32).
-OR-
Where ‘yyy’ is a
numerical value
representing the
current sensor
reading: useful in
locating the best
sensor position.
numerical value
representing the
current sensor
reading: useful in
locating the best
sensor position.
þ
Note: Never
position the
sensor over a
perforation when
recording a
sensor reading.
sensor over a
perforation when
recording a
sensor reading.