White SEW E-Z W338 用户手册

10

1. Turn the handwheel (K) 

clockwise to raise the needle
(R) to its highest position.

2. Loosen the needle clamp screw

(O) by turning it 
counter-clockwise (toward
you).  You may need to use a
short 
slotted screwdriver or small 
pliers.

3. Remove the needle (R) pulling

down, away from the needle
clamp(P).

4. Place the new needle with the

flat side facing in against the
needle clamp(P).

5. Push it gently as far up as it will

go, and against the needle
clamp(P).

6. Tighten the needle clamp screw

(O) while holding the needle
(R) in place.

Note:  Size 90/14 sewing machine
needles are recommended.