Whirlpool W10385092A 手册
9
CYCLE GUIDE — MANUAL AND STEAM CYCLES
Any load
Timed Dry
High 40
Wrinkle Shield
™
Use to dry items to a damp level, or for items that
NOTE: Select Air
Medium
do not require an entire drying cycle. Select a drying
Dry to dry foam,
Low
temperature based on the type of fabrics in your
rubber, plastic, or
Extra Low
load. If you are unsure of the temperature to select
heat-sensitive
Air Dry
for a load, select the lower setting rather than the
fabrics.
higher setting.
Small loads and
Small Load
High
27
Wrinkle Shield
™
For small loads of 3-4 items.
sportswear
(non-steam
Medium
models only)
Low
Extra Low
Air Dry
Mixed Loads
Touch Up
High
20
Wrinkle Shield
™
Use to reduce wrinkles, including from loads left in
(non-steam
Medium
the dryer too long. Cycle run time may be manually
models only)
Low
adjusted, but Temperature is selectable.
Extra Low
Air Dry
Shirts, blouses,
Quick Refresh
Medium 15
Wrinkle Shield
™
Use to reduce odors and light wrinkles.
and slacks
(Steam
NOTE: Do not add dryer sheets.
models only)
Mixed Loads
Enhanced
High
20
Wrinkle Shield
™
Use to reduce wrinkles, including from loads left in
Touch Up
Medium
the dryer too long. Cycle run time may be manually
(Steam
adjusted, and Temperature is selectable.
models only)
NOTE: Do not add dryer sheets.
Items to dry:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Settings and options shown in
bold are default settings
for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Steam cycles (on some models) are designed for use
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Steam cycles (on some models) are designed for use
with dry loads to loosen wrinkles, reduce odors, and
refresh fabrics.
Adjusting drying time on Manual Cycles
When you select a Manual Cycle, the
default time appears in the display.
Use the More Time s and Less Time t
buttons to increase or decrease the
time in 1 minute increments. Press
and hold to change the time in
5 minute increments.
The maximum dry time is 100 minutes.
The maximum dry time is 100 minutes.
Using Air Dry
Use the Air Dry temperature setting with Manual Cycles for
items that require drying without heat such as rubber, plastic,
and heat-sensitive fabrics. This chart shows examples of items
that can be dried using Air Dry.
When using Air Dry:
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Dry can only be used with Manual Cycles.
NOTE: Air Dry can only be used with Manual Cycles.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (Air Dry) setting for foam, rubber, plastic, or
Use a no heat (Air Dry) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Type of Load
Est. Time*
(Minutes)
Foam rubber – pillows, padded bras,
Foam rubber – pillows, padded bras,
20–30
stuffed toys
Plastic – shower curtains, tablecloths
Plastic – shower curtains, tablecloths
20–30
Rubber-backed rugs
40–50
Olefin, polypropylene, sheer nylon
10–20
*Reset time to complete drying, if needed.
Sensing
Wet
Damp
Sensing
Wet
Damp
Cool
Down
Done
Wrinkle
Shield
Steam
Control Lock
Control Lock
Sensing
Wet
Damp
Cool
Down
Done
Wrinkle
Shield
Control Lock
Steam model
Non-Steam model