Whirlpool LEQ8000HQ0 用户手册
7
CHECKING YOUR VENT
V
ENTING
(
CONT
.
)
6.
Clean exhaust vent periodically, depending on use,
but at least every 2 years,
or when installing your
dryer in a new location.
or when installing your
dryer in a new location.
•
Disconnect vent from
the dryer and clean one
section at a time until
you reach the exhaust
hood.
section at a time until
you reach the exhaust
hood.
•
Use the hose attach-
ment on your vacuum,
or a pole or wire with a
or a pole or wire with a
feather duster or rag attached, to clean out lint.
•
Be sure the flapper on the outside end of vent
moves freely.
moves freely.
•
When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer
for final product check.
Installation Instructions supplied with your dryer
for final product check.
4.
Use the straightest path possible when routing
the exhaust vent. Use
the fewest number
of elbows and turns.
Allow room when using
elbows or making turns.
Bend vent gradually to
avoid kinking.
the fewest number
of elbows and turns.
Allow room when using
elbows or making turns.
Bend vent gradually to
avoid kinking.
5.
Use duct tape to seal all joints. Do not use
screws to secure vent.
Lint may catch on
screws.
Lint may catch on
screws.