Whirlpool 8533582 用户手册

Check that you have everything necessary for correct installation. 
Proper installation is your responsibility.

Remove parts packages from dryer drum. Check that all parts are 
included.

■

Parts package.

 Do not use leveling legs if installing the dryer on a 

pedestal.

Check local codes. Check existing electrical supply and venting.  
See “Electrical Requirements” and “Venting Requirements” 
before purchasing parts.

■

For close-clearance installations between 31.5 in. (80.01 cm) 
and 37 in. (93.98 cm), see “Plan Vent System” section for 
venting requirements.

Mobile home installations require metal exhaust system hardware 
available for purchase from the dealer from whom you purchased 
your dryer. For further information, please refer to the “Assistance 
or Service” section of this manual.

Are you placing the dryer on a pedestal? You may purchase a 
pedestal separately for this dryer. This pedestal will add about 
13 in. (33 cm) to the height of your unit for a total height of 
approximately 51 in. (130 cm). 

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number LAB2700LQ (White), LAB2700LT (Biscuit) or 
LAB2700LL (Pewter).

Are you planning to stack your DUET

®

 washer and dryer? To do 

so, you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8541503.

Are you planning to reverse the door swing direction on your 
DUET

® 

dryer? To do so, you will need to purchase a Door 

Reversal Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 3979303 (Shield Blue), 3979304 (Shield 
Platinum), 3979770 (Biscuit Dark) or 3988097 (Whistler Grey).

Are you planning to reverse the door swing direction on your 
DUET

® 

dryer and stack your DUET

® 

washer and dryer? To do so, 

you can purchase a Door Reversal and Stack Combination Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance and Service” section of this manual. Ask 
for Part Number 8559215 (Shield Blue), 8559216 (Shield 
Platinum), 8559217 (Biscuit Dark) or 8559218 (Whistler Grey).

■

Flat-blade screwdriver

■

Adjustable wrench that 
opens to 1 in. (2.5 cm) or 
hex-head socket wrench 
(for adjusting dryer feet)

■

Level

■

Wire stripper (direct wire 
installations)

■

#2 Phillips screwdriver

■

Safety glasses

■

Vent clamps

■

Caulking gun and 
compound (for installing 
new exhaust vent)

■

Gloves

■

Tin snips (new vent 
installations)

■

¼ in. nut driver