BENDIX TCH-001-052 产品宣传页

© 2004 Bendix Commercial Vehicle Systems LLC.  All rights reserved.  5/2004.  Printed in U.S.A.

See vehicle manual, Bendix troubleshooting materials, or visit www.bendix.com for more information.

4.

As needed, following the vehicle manufacturer’s

recommended procedures, deactivate the

electrical system in a manner that removes all

electrical power from the vehicle.

5.

Typically, when working in the engine

compartment the engine should be shut off.

Where circumstances require that the engine be

in operation, extreme caution should be used to

prevent personal injury resulting from contact

with moving, rotating, leaking, heated, or

electrically charged components.

6.

Never connect or disconnect a hose or line

containing pressure; it may whip.  Never remove

a component or plug unless you are certain all

system pressure has been depleted.

7.

Never exceed recommended pressures and always

wear safety glasses.

8.

Do not attempt to install, remove, disassemble or

assemble a component until you have read and

thoroughly understand the recommended

procedures.  Use only the proper tools and observe

all precautions pertaining to use of those tools.

9.

Use only genuine Bendix replacement parts,

components, and kits.  Replacement hardware,

tubing, hose, fittings, etc.  should be of equivalent

size, type, and strength as original equipment and

be designed specifically for such applications and

systems.

10. Components with stripped threads or damaged

parts should be replaced rather than repaired.

Repairs requiring machining or welding should

not be attempted unless specifically approved and

stated by the vehicle or component manufacturer.

11. Prior to returning the vehicle to service, make

certain all components and systems are restored

to their proper operating condition.