Weslo WLCCEL1406.0 业主指南

2. While another person lifts the back of the Frame (1),

attach the Rear Stabilizer (28) to the Frame with two

M10 x 75mm Carriage Bolts (34) and two M10 Nylon

Locknuts (33). 

34

28

1

2

33

33

3. The Console (23) requires four “AA” batteries (not

included); alkaline batteries are recommended. Press

the tab on the battery door and remove it. Insert four

batteries into the Console as shown. Make sure that

ings on the battery door. Then, reattach the battery

door.

23

Batteries

Battery

Door

Tab

3

4. While another person holds the Console (23) near the

Upright (2), connect the console wire to the Upper

Wire (44). Insert the console wire and the Upper Wire

into the Upright. 

Next, attach the Console (23) to the Upright (2) with

four M6 x 18mm Screws (43). Be careful to avoid

4

23

2

44

Console Wire

43

5

1

2

33

44

53

48

59

5. While another person holds the Upright (2) near the

Frame (1), connect the Upper Wire (44) to the Lower

Wire Harness (53). Push the excess wire downward

into the Frame. Next, slide the Upright onto the Frame.

Be careful not to pinch the wires. Attach the Upright

with two M10 x 68mm Button Bolts (48), two M10 Split

Washers (59), and two M10 Nylon Locknuts (33). Do