Fujitsu PRIMERGY TX300 S4 LKN:ITL1159101-001 产品宣传页
产品代码
LKN:ITL1159101-001
Data sheet
⏐ Issue: May 7, 2008⏐ PRIMERGY TX300 S4
Page 2 / 2
Type
Dual Socket Tower Server
System board
D 2529
Chip set
Intel® 5000P
Processors
Dual- or Quad-Core Intel® Xeon® (1 - 2)
Frequencies (GHz)
E5205 (1.86) 65W; L5240 (3.00) 50W,
X5260 (3.33) 80W DC / L5310 (1.60), L5410
(2.33), L5420 (2.50) 50W QC / E5405 (2,00),
E5420 (2.50), E5430 (2.66 GHz), E5440
(2.83), 80W, X5460 (3.16) 120W QC
X5260 (3.33) 80W DC / L5310 (1.60), L5410
(2.33), L5420 (2.50) 50W QC / E5405 (2,00),
E5420 (2.50), E5430 (2.66 GHz), E5440
(2.83), 80W, X5460 (3.16) 120W QC
Front-Side-Bus
1066 (E5205, L5310), 1333 MHz
Second-Level-Cache
2x 4 MB (53xx), 6 MB (52xx), 2x 6 MB (54xx)
ECC
ECC
Memory
1 Gbyte up to max. 64 GByte
(48 GB with standard power supply)
(48 GB with standard power supply)
4-way interleaved, FullyBuffered DIMM DDR2 FBD667; ECC; 2
boards (1x standard), 16 slots divided into 2 branches with 2
channels each and 4 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring and hot-spare
option, memory upgrade only per branch with module pairs
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition / RomPilot
Interfaces
Serial 1
boards (1x standard), 16 slots divided into 2 branches with 2
channels each and 4 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring and hot-spare
option, memory upgrade only per branch with module pairs
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition / RomPilot
Interfaces
Serial 1
1x RS-232-C (9-pin) (usable for iRMC or
system or shared)
system or shared)
Serial 2
1x RS-232-C (9-pin)
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
Keyboard, Mouse
2x PS/2
USB 2.0
1x front, 2x back; (OHCI, 480 Mbit/s) 2x
internal for backup drives + 1x USB stick
internal for backup drives + 1x USB stick
Graphics
1x VGA (15-pin)
LAN
2x RJ45, 1x Service10/100 Mbit/s (can be
switched on Gbit LAN port)
switched on Gbit LAN port)
Front Panel
On/off switch; NMI-, reset button; LEDs for global error (amber/
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
Onboard controller **
SATA ESB2-T
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
Onboard controller **
SATA ESB2-T
2 x SATA channel for DVD
SAS in internal
PCIe slot either
LSI 1068
or LSI 1078
PCIe slot either
LSI 1068
or LSI 1078
8 port SAS for internal HDD´s and internal
backup devices
with RAID 0, 1 (Integrated Mirroring
Enhanced also for odd numbered HD´s for
Windows and Linux)
with RAID 0, 1, 10 5, 50, 6, 60 (256 or 512
MB RAID Cache and opt. BBU)
backup devices
with RAID 0, 1 (Integrated Mirroring
Enhanced also for odd numbered HD´s for
Windows and Linux)
with RAID 0, 1, 10 5, 50, 6, 60 (256 or 512
MB RAID Cache and opt. BBU)
LAN (2x
BroadCom5708)
BroadCom5708)
2x 10/100/1000 Mbit/s Ethernet (TCP/IP
acceleration) (PXE-Boot via LAN from PXE
server), iSCSI boot (also diskless) via
onboard LAN
acceleration) (PXE-Boot via LAN from PXE
server), iSCSI boot (also diskless) via
onboard LAN
Server
management
management
Integrated Remote Management Controller
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0 compatible
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0 compatible
TPM (optional)
Infineon / 1.2
Hard disk drives
36, 73, 146, 300 Gbyte 3.5-inch SAS and/or
250, 500, 750 Gbyte 3.5-inch SATA or 36,
73, 146 Gbyte 2.5-inch SAS optional; 3.5-
inch SAS / SATA mix in separate RAID sets,
no later conversion 3.5 to 2.5-inch
250, 500, 750 Gbyte 3.5-inch SATA or 36,
73, 146 Gbyte 2.5-inch SAS optional; 3.5-
inch SAS / SATA mix in separate RAID sets,
no later conversion 3.5 to 2.5-inch
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.
capacity may vary.
I/O Slots (Standard)
5x PCIe x8, x4 wired (from 4 PCIe x4 Slots two can be used x8, if
neighbour slot is empty)
1 x PCI-X 64-bit / 133 MHz, 3.3 V
Drive bays
for hard disks
neighbour slot is empty)
1 x PCI-X 64-bit / 133 MHz, 3.3 V
Drive bays
for hard disks
6x 3,5/1-inch, for SAS / SATA or 12x 2,5/1-inch
for SAS optional
for SAS optional
All rights reserved, including intellectual property rights. Technical data subject to modifications and
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
Copyright © Fujitsu Siemens Computers 05/2008
Published by
Company stamp
for optional hard
disks
disks
2x 3,5/1-inch, Hot-plug SAS/SATA or 8x 2,5/1-
inch Hot-plug SAS, (not with standard PSU)
occupies two 5.25/1.6-inch bays
inch Hot-plug SAS, (not with standard PSU)
occupies two 5.25/1.6-inch bays
for accessible drives
3x 5.25/1.6-inch free, (possible options for LSP
or LSD module, DVD etc. see relevant system
configurator)
or LSD module, DVD etc. see relevant system
configurator)
Electrical values
1x 605W standard power supply plus two 120mm standard fans or
1x 700W hot-plug power supply plus four hot-plug fans (2x system 2x
CPU); additional hot-plug units for redundancy option
Output power
1x 700W hot-plug power supply plus four hot-plug fans (2x system 2x
CPU); additional hot-plug units for redundancy option
Output power
605 W / 700W, 1 + 1 x 700 W each
Rated voltage range
100 - 240 V
Rated frequency
50 - 60 Hz
Max. rated current
100 V - 240 V / 9.0 A – 5.0 A
Rated current in basic
configuration
configuration
100 V - 240 V / 4.4 A - 1.5 A
Active power
798 W
Apparent power
809 VA
max.heat dissipation
2873 kJ/h (2723 Btu/h)
Temperature/Noise/Dimensions/Weight
Ambient temperature
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class 3K2
ETSI 300 019-2-3 Class 3.1
ETSI 300 019-2-3 Class 3.1
Declared noise emission
according to ISO 9296
according to ISO 9296
idle* operating* (*ISO 7779)
ETSI 300 753 Class 3.1
ETSI 300 753 Class 3.1
L
WAd
(1 B = 10 dB) :
5,7 B*** 5,8 B***
L
pAm
(bystander position): 39 dB*** 40 dB***
Floor-stand (HxWxD)
473 * 286 * 775 (mm)
Rack (HxWxD)
177 * 483 * 770 (mm);
Rack mounting depth 735 mm; 4 HU
Rack mounting depth 735 mm; 4 HU
Weight
ca. 25 - 40 kg (configuration dependent)
Compliance with Norms and Standards
Product safety
Global / Europe
Product safety
Global / Europe
IEC 60950-1 / EN 60950-1
USA
UL 60950-1
Canada
CAN/CSA C22.2 No. 60950-1-3
Electromagnetic compatibility
Europe
Europe
EN 55 022 class A, EN 55024,
EN 61000-3-2 / 3-3, ETSI EN300386
EN 61000-3-2 / 3-3, ETSI EN300386
Taiwan / Japan
CNS 13438 class A / VCCI class A
Australia / New Zealand AS / NZS CISPR 22 class A
USA / Canada
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
Europe (CE)
2004/108/EC(EMV);2006/95 EC(LVD)
North America
FCC class A
Approvals
Product safety
Global / Europe
Product safety
Global / Europe
CB / CE
USA / Canada
CSA
US
/ CSA
C
There is general compliance with the safety requirements of all
European countries and North America. National approvals required in
order to satisfy statutory regulations or for other reasons, can be applied
for on request.
European countries and North America. National approvals required in
order to satisfy statutory regulations or for other reasons, can be applied
for on request.
Supported server operating systems
See actual release status
See actual release status
: e.g. Windows Server
2003; Windows Server 2008, Novell SUSE Linux Enterprise Server ,
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives
Notes
** For supported controllers (onboard and PCI cards for SCSI, RAID,
LAN, WAN, etc.), please refer to the corresponding system configurator.
*** only with standard fans and standard PSU
Server Management (see separate data sheets)
Standard
** For supported controllers (onboard and PCI cards for SCSI, RAID,
LAN, WAN, etc.), please refer to the corresponding system configurator.
*** only with standard fans and standard PSU
Server Management (see separate data sheets)
Standard
PRIMERGY ServerView Suite; PDA, ASR&R
Optional (excerpt)
ServerView Local Service Panel (LSP) or Local
Status Display (LSD),, RemoteView, iRMC S2
Advanced Pack
Status Display (LSD),, RemoteView, iRMC S2
Advanced Pack