Weslo WLTL29613.2 业主指南

2.    Make sure that the power cord is unplugged.

   With the help of a second person, carefully tip 

the treadmill onto its left side. Unfold the Frame 

(50) away from the Uprights (73). Do not lean 

   Orient the Base (36) as shown. Attach the Base 

to the Uprights (73) with four M10 x 65mm  

Screws (1). Start all four Screws, and then 

   Raise the Upright (73) so that the Base (36) is 

flat on the floor.

1

73

36

1

2

50

•  To hire an authorized service technician to 

assemble the treadmill, call 1-800-445-2480.

•  Assembly requires two persons.

•  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 

materials until you finish all assembly steps.

•  After shipping, there may be an oily substance 

on the exterior of the treadmill. This is normal. If 

there is an oily substance on the treadmill, wipe 

it off with a soft cloth and a mild, non-abrasive 

cleaner.

•  Left parts are marked “L” or “Left” and right parts 

are marked “R” or “Right.”

•  To identify small parts, see page 7.

•  Assembly requires the following tools:

the included hex keys  

one Phillips screwdriver 

needlenose pliers 

 

To avoid damaging parts, do not use power tools. 

1.   Go to www.wesloservice.com/registration on 

  •   activates your warranty
  •   saves you time if you ever need to contact 

Customer Care

  •   allows us to notify you of upgrades and offers

   Note: If you do not have Internet access, call 

Customer Care (see the front cover of this 

manual) and register your product.

1