Kingston Technology 2GB 400MHz DDR ECC Registered CL3 (3-3-3) DIMM Dual Rank, x4 KVR400D4R3A/2G 数据表
产品代码
KVR400D4R3A/2G
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 256M x 72-bit 2GB (2048MB) DDR400 CL3
SDRAM (Synchronous DRAM) "dual rank" Registered ECC memory module. The compo-
nents on this module include thirty-six 128M x 4-bit (32M x 4-Bit x 4 bank) DDR400
SDRAM in FBGA packages. This 184-pin DIMM uses gold contact fingers and requires
+2.6V. The electrical and mechanical specifications are as follows:
SDRAM (Synchronous DRAM) "dual rank" Registered ECC memory module. The compo-
nents on this module include thirty-six 128M x 4-bit (32M x 4-Bit x 4 bank) DDR400
SDRAM in FBGA packages. This 184-pin DIMM uses gold contact fingers and requires
+2.6V. The electrical and mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK)
5ns (min.) / 10ns (max.)
Row Cycle Time (t
RC
)
55ns (min.)
Refresh Row Cycle Time (tRFC)
70ns (min.)
Row Active Time (tRAS)
40ns (min.) / 70,000ns (max.)
Single Power Supply of
+2.6V (+/- .1V)
Power
11.024 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0426-001.A00
05/21/05
Figure 1: KVR400D4R3A/2G 184-Pin DIMM
KVR400D4R3A/2G
2GB 256M x 72-Bit DDR400 CL3
Registered 184-Pin ECC DIMM
(Units = millimeters)
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.200" (30.48mm).
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.200" (30.48mm).