Brother PT-9200 用户手册
31
Power button
Changing the P-touch’s Baud Rate
The PT-9200DX’s default baud rate for a serial connection is 115,200 bps. Some computers may not support a serial port
baud rate of 115,200 bps. If so, follow the procedure below to change the P-touch’s baud rate to 9,600 bps. In addition, the
baud rate for the port must also be set to 9,600 bps.
baud rate of 115,200 bps. If so, follow the procedure below to change the P-touch’s baud rate to 9,600 bps. In addition, the
baud rate for the port must also be set to 9,600 bps.
1 Turn off the PT-9200DX.
2 Hold down the power button for about five seconds.
3 Release the power button when it begins flashing in red and green.
4 The baud rate of the PT-9200DX has been set to the slower baud rate of 9,600 bps.