Waterford Appliances Ceramic Hob 用户手册

The following are a list of minor faults with instructions on how to rectify them which should be checked by
the user.

1.

The appliance is not working

-

power supply failure

-

check the in-house electric sys-
tem fuse, replace if necessary

2.

The appliance does not respond 
to entered settings

-

Control panel has not been 
switched on

-

Sensors have been touched for 
less than one second

-

Several sensors have been 
touched at the same time

-

Switch it on

-

Touch the sensors for a bit longer

-

Always touch only one sensor 
(except when switching off a hot
plate)

3. The appliance does not respond 

and emits a short signal

-

Child lock has been activated

-

Switch off the Child lock

4. The appliance does not respond 

and emits a long signal

-

Improper operation (improper sen-
sors have been touched or proper 
sensors have been touched for too
short a time

-

Covered or dirty sensor (sensors)

-

Again activate the plate

-

Uncover or clean the sensors

5. The whole appliance switches off

-

No settings have been entered 
within 10 seconds from switching 
the plate on

-

Covered or dirty sensor(s)

-

Again switch on the control panel 
and immediately enter the settings

-

Uncover or clean the sensors

6. One hotplate switches off

-

Limited time of operation

-

Covered or dirty sensor(s)

-

Again switch on the hotplate

-

Uncover or clean the sensors

7.

Residual temperature indicator is 
not lighted although the hotplates
are still hot

-

power supply failure, the appliance
has been disconnected from the 
mains

-

the residual temperature indicator 
will work again after switching the 
control panel on and off.

9.

If the fault still remains

Disconnect the ceramic plate from the mains (fuse) and call the nearest
Customer Service Centre.

9