Wright Manufacturing 98320007 用户手册

.  

This is the safety alert symbol. It is used throughout this manual and on the owner’s safety 
labels to alert you to potential personal injury hazards.  Read these instructions carefully. It is 
essential that you read the instructions and safety precautions before you attempt to work on 
or use this unit. Obey all safety messages that follow to avoid possible destruction of 
property, injury or death 

 

 

 
 

 
 

 
 

•  Become familiar with the Wright Z and it’s 

Owner’s Manual. It is necessary to understand 
how to shut down the PTO system and be 
familiar with the mower controls.  

•  Read the mower Owner’s Manual and this 

manual completely.  

•  Identify and obey all safety warning decals. If 

any decals are missing, replace with new.  

•  Only allow well-trained adults age 18 or older to 

operate equipment.  

•  Wear appropriate eye and ear protection with 

properly fitting protective clothing.  

•  Use caution with rotating blades and blower. 

ALWAYS wait at least one-minute after turning 
off Blade-Clutch and engine before installing, 
adjusting, servicing or removing grass 
collection system.  

•  DANGER, Risk of thrown objects from mower 

blades and blower traveling at high speeds. 
NEVER operate mower with exposed mower 
deck or blower discharge.  

•  Check transfer hose connection point at blower 

and receptacle frame. NEVER run blower 
without transfer hose firmly connected to blower 
housing and bag receptacle housing.  

•  ALWAYS check mounting hardware. Grass 

Collection system should be firmly mounted the 
mower at all times during operation. DO NOT 
operate if any hardware is missing or loose.  

•  Always keep shields and guards in place. 

Removal of protective shields can risk serious 
injury or death during operation.  

•  If grass collection system is removed from 

mower, reinstall mower chute deflector BE-
FORE continued operation.  

•  Transfer hose and grass collection bags are 

subject to wear and MUST be replaced when 
torn, cracked, or unable to effectively channel 
discharge materials.  

•  Extreme CAUTION should be used on hills. 

The grass collection system will raise the 
mower’s center of gravity and increase the risk 
of tipping or rollover. 

1  Turn off blade clutch PTO using Mower Controls.  
2  Set the motion controls to neutral and set the parking 

brake.  

3  Turn off engine and remove starter key.  
4  Disconnect hose from blower and use a piece of 

wood to rotate propeller in reverse. It may be 
necessary to disconnect the blower belt to effectively 
turn impeller and dislodge the obstruction. DO NOT 
insert hands or fingers into the blower housing, the 
propeller may spin once the obstruction is dislodged. 

The Wright Z was designed to maintain stability 
using this grass collection system.  However, it is 
still necessary that the proper precautions be 
taken to ensure operator safety and stability.  
•  Adjust the rear wheel motor supports to be furthest 

from the mower deck. This is achieved by removing 
the wheels and unbolting the four mounting bolts for 
the wheel motor supports. Moving the motor 
supports to the back of the frame will improve the 
overall balance and stability of the machine.  This 
eliminates the need to add weights to the front of the 
machine.  

•  Travel at a reasonable speed when traversing 

uneven, loose or sloped ground  

•  Keep collection levels low when mowing on hills by 

emptying the bags frequently. This will increase the 
stability of the mower.  

•  If the mower is unable to mow in a straight line 

across the slope of a hill, the grade of the hill is too 
steep. Always start at the bottom of a hill to check 
this before proceeding further up the hill.  

•  Use extreme caution in mowing near streams, rivers 

and ponds. Maintain a distance of at least ten (10) 
feet at all times. The remainder should be cut with a 
walk-behind mower or trimmer.