WHP Wireless DL360 用户手册

Powering Up the Server................................................................................................................

Powering Down the Server...........................................................................................................

Extending the Server from the Rack.............................................................................................

Removing the Access Panel .........................................................................................................

Installing the Access Panel ...........................................................................................................

Removing PCI Riser Board Assembly .........................................................................................

Installing PCI Riser Board Assembly...........................................................................................

 

To power up the server, press the Power On/Standby button. 

 

 

  WARNING:  To reduce the risk of personal injury, electric 

shock, or damage to the equipment, remove the power cord to 
remove power from the server. The front panel Power On/Standby 
button does not completely shut off system power. Portions of the 
power supply and some internal circuitry remain active until AC 
power is removed. 

IMPORTANT:  If installing a hot-plug device, it is not necessary to 
power down the server. 

1.  Back up the server data. 

2.  Shut down the operating system as directed by the operating system 

documentation. 

3.  If the server is installed in a rack, press the UID LED button on the front 

panel. Blue LEDs illuminate on the front and rear panels of the server.