Western Digital WD ShareSpace 用户手册

REPLACING A DRIVE - 180

WD SHARESPACE

USER MANUAL

10. Slide the drive carrier all the way into the drive bay, and then push directly on

the drive (not on the mounting rails) until the assembly latches securely into
place and you hear a click.

11. Replace the system cover.

(a) Carefully place the system cover on the unit so that the tabs on the cover align with the slots

on the unit.

(b) Slide the cover toward the front of the unit until it is fully closed.

12. Reconnect the cables and power on the unit.

13. The drive starts the rebuild process automatically. The RAID rebuild may take up

to 34 hours depending on RAID mode and drive capacity and activity. See the

Note: For RAID modes other than RAID 1, RAID 5, and RAID 10, data cannot be accessed until the
rebuild is complete.

14. Once the rebuild is complete, the power LED will change from flashing green to

steady green.

15. Connect the interface cable and set up the new drive for RAID configuration (for