Superchips Inc. Car Stereo System 1715 maz 用户手册
Page 7 of 16
Form 0129L 03/29/07
Superchips Inc
.
Superchips Inc.
1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Selecting the tuning level
The “PERFORMANCE” tuning level provides the most aggressive performance gains. Use
of premium fuel (91 octane or greater) is required to realize these gains. No towing is
permitted while using the “PERFORMANCE” tuning level.
of premium fuel (91 octane or greater) is required to realize these gains. No towing is
permitted while using the “PERFORMANCE” tuning level.
The “87 OCTANE” tuning level provides optimized engine performance and enhanced
transmission tuning when 87 octane fuel is used. The “87 OCTANE” tuning level may not
be available for all vehicles.
transmission tuning when 87 octane fuel is used. The “87 OCTANE” tuning level may not
be available for all vehicles.
If your vehicle is a Lightning or supercharged Harley Davidson Edition vehicle, an “HP4”
tuning level is offered in lieu of the “87 Octane” tuning level. This tuning level should be
used if you have installed a 4lb pulley to raise the boost pressure. Do not select this tuning
level if you have the stock pulley installed. Doing so will degrade engine performance.
tuning level is offered in lieu of the “87 Octane” tuning level. This tuning level should be
used if you have installed a 4lb pulley to raise the boost pressure. Do not select this tuning
level if you have the stock pulley installed. Doing so will degrade engine performance.
The “TOW-PERF” tuning level provides engine and transmission tuning enhanced for towing
applications. The “TOW-PERF” tuning level should be selected when your vehicle is used for
towing. Maximum trailer weight of a stock vehicle is specified by the original manufacturer.
Towing loads greater than this may cause damage the vehicle. Damage caused by towing
weights greater than the maximum trailer weight specified for your vehicle shall not be the
responsibility of Superchips Inc. See the important insert regarding “Maximum Trailer Weight”
in the packaging materials for your MAX MicroTuner for more information. Use of premium fuel
(91 octane or greater) is required.
applications. The “TOW-PERF” tuning level should be selected when your vehicle is used for
towing. Maximum trailer weight of a stock vehicle is specified by the original manufacturer.
Towing loads greater than this may cause damage the vehicle. Damage caused by towing
weights greater than the maximum trailer weight specified for your vehicle shall not be the
responsibility of Superchips Inc. See the important insert regarding “Maximum Trailer Weight”
in the packaging materials for your MAX MicroTuner for more information. Use of premium fuel
(91 octane or greater) is required.
The MAX MicroTuner will Display the following:
Tuning Level:
xxxxxxxx
Pressing ‘<’ and ‘>’ on the keypad changes the fuel setting.
Pressing ‘YES’ on the keypad saves the tuning level setting.
Pressing ‘YES’ on the keypad saves the tuning level setting.
If “PERFORMANCE” tuning is selected, the MAX MicroTuner beeps once and displays:
Towing a Trailer
YES or NO
YES or NO
If the ‘YES’ key is pressed to indicate you plan to tow a trailer, the MAX MicroTuner
beeps and displays:
beeps and displays:
Use Tow-Perf
Only
Only
Press >
to Continue…
to Continue…
6. Editing the Custom Options Settings
The MAX MicroTuner will beep and display the keys to use while editing the Custom Option
settings:
settings:
Use < and > to
then
Pressing 'YES'
Adjust an Option
Saves the Option
Then
Press Any Key to
Start Editing...
Start Editing...
Caution
The PERFORMANCE, TOW-PERF and HP4 tuning levels require that you use at least 91
octane fuel. Using a lower octane fuel while the PERFORMANCE, TOW-PERF or HP4
tuning level is selected may cause detonation that can cause damage to your engine that
is not covered by the Superchips warranty.
octane fuel. Using a lower octane fuel while the PERFORMANCE, TOW-PERF or HP4
tuning level is selected may cause detonation that can cause damage to your engine that
is not covered by the Superchips warranty.
Page 8 of 16
Form 0129L 03/29/07
Superchips Inc
.
Superchips Inc.
1790 East Airport Blvd., Sanford, FL. 32773 (407) 585-7000 http://www.Superchips.com
Superchip & Superchips are registered trademarks of Superchips, Inc.
Pressing ‘<’ and ‘>’ on the keypad adjusts the Custom Option setting.
Pressing ‘YES’ on the keypad saves the Custom Option setting.
Pressing ‘YES’ on the keypad saves the Custom Option setting.
Press any key on the keypad to continue. The MAX MicroTuner will beep and display:
Manual Trans?
YES / NO
YES / NO
Press ‘YES’ if the vehicle has a Manual Transmission. Shift Points and Shift Pressures
are not options on Manual Transmission vehicles.
are not options on Manual Transmission vehicles.
Press ‘NO’ if the vehicle has an Automatic Transmission.
Editing the Shift Points Option Settings
The Shift Point option allows the user to set each Shift Point independently. The choices are:
•
Adjust from STOCK (or the gear corrected STOCK) Shift Point +/- ~ 10mph.
• Use
the
Superchips Performance Program Shift Point setting.
Some basic rules are implemented by the MAX MicroTuner for Shift Point options:
•
If the Shift Point is raised, the Down-Shift point remains at the STOCK or Superchips
Performance Program setting.
•
•
If the Shift Point is lowered both the Up-Shift and Down-Shift settings are lowered
proportionally.
•
•
The WOT (Wide Open Throttle) setting is raised or lowered proportionally with the
Up-Shift setting.
The following screens for editing the Shift Points are the same for all Shift Points, except
the selected Shift Point replaces ‘n-n’ in the descriptions that follow.
the selected Shift Point replaces ‘n-n’ in the descriptions that follow.
The MAX MicroTuner will beep and initially display the message:
SHIFT POINT n-n
Superchips
Once a shift point has been changed, the message displayed will be:
SHIFT POINT n-n
MIN----ST----MAX
(n-n is 1-2, 2-3 or 3-4, ST = Stock)
The present Shift Point setting will flash. MAX is approximately 10mph above the STOCK
setting. MIN is approximately 10mph below the STOCK setting.
setting. MIN is approximately 10mph below the STOCK setting.
Use ‘<’ to lower the Shift Point, ‘>’ to raise the Shift Point.
Press ‘>’ while MAX is flashing to select the Superchips Performance Program setting.
Press ‘YES’ to save the desired Shift Point setting.
Press ‘>’ while MAX is flashing to select the Superchips Performance Program setting.
Press ‘YES’ to save the desired Shift Point setting.
The MAX MicroTuner will repeat this process for each Shift Point.
Editing the Shift Pressure Option Settings
The Shift Pressure Option allows the user to set each Shift Pressure independently. The
choices are:
•
choices are:
•
Use the STOCK setting for the Shift Pressure.
• Adjust
the
Superchips Performance Program setting for the Shift Pressure.
The following screens for adjusting the Shift Pressure are the same for all Shift Pressures,
except the selected Shift Pressure replaces ‘n-n’ in the descriptions that follow.
except the selected Shift Pressure replaces ‘n-n’ in the descriptions that follow.
After choosing the shift points you wish to use, the MAX MicroTuner will beep and initially
display the message:
display the message:
SHIFT PRESS n-n
Superchips