Sunfire HRS-SAT4BIP 用户手册

User's Manual

5

1.  Mounting Brackets

Each surround loudspeaker has two 

keyhole brackets that allow for wall 

mounting horizontally or vertically.

.  Binding Posts

The gold-plated spring-loaded termi-

nals accept bare wire, tinned-wire, or 

pins.  Always use high quality connec-

tions and speaker wires, and make 

sure there are no loose fittings or stray 

wire strands.

Connect the positive speaker-level 

output of your power amplifier or 

receiver to the positive (red) input of 

the loudspeaker. Connect the negative 

speaker-level output of your power am-

plifier or receiver to the negative (black) 

input of the loudspeaker.

Make sure that the positive and nega-

tive connections do not touch, or this 

may damage your power amplifier.

3.  Grilles

The tweeter and woofer grilles are held 

in place with small magnets, and can 

be easily removed if required. Gently 

pry them off by hand by lifting the cor-

ners one at a time.

The magnetic logo badge fits either 

vertically or horizontally in shallow re-

cesses in the woofer grille, depending 

on how you are using the loudspeaker.

4.  Threaded Insert

This 1/4-0 threaded insert allows the 

loudspeaker to be attached to com-

monly available wall mounts, instead of 

using the keyhole brackets.

Features

4

1



3