Spectrum Brands MC.31XX 用户手册
Introduction
Hardware information
(c) Spectrum GmbH
13
Dynamic Parameters
Dynamic parameters are measured at ± 1 V input range (if no other range is stated) and 50 Ohm termination with the samplerate specified in the table. Measured parameters are aver-
aged 20 times to get typical values. Test signal is a pure sine wave of the specified frequency with > 99% amplitude. SNR and RMS noise parameters may differ depending on the quality
of the used PC. SNR = Signal to Noise Ratio, THD = Total Harmonic Distortion, SFDR = Spurious Free Dynamic Range, SINAD = Signal Noise and Distortion, ENOB = Effective Number
of Bits. For a detailed description please see application note 002.
aged 20 times to get typical values. Test signal is a pure sine wave of the specified frequency with > 99% amplitude. SNR and RMS noise parameters may differ depending on the quality
of the used PC. SNR = Signal to Noise Ratio, THD = Total Harmonic Distortion, SFDR = Spurious Free Dynamic Range, SINAD = Signal Noise and Distortion, ENOB = Effective Number
of Bits. For a detailed description please see application note 002.
Order information
MC.3110
MC.3111
MC.3111
MC.3112
MC.3120
MC.3121
MC.3121
MC.3122
MC.3130
MC.3131
MC.3131
MC.3132
Test - Samplerate
1 MS/s
1 MS/s
10 MS/s
10 MS/s
25 MS/s
25 MS/s
Testsignal frequency
90 kHz
90 kHz
1 MHz
1 MHz
1 MHz
1 MHz
SNR (typ)
> 67.5 dB
> 66.9 dB
> 64.9 dB
> 64.9 dB
> 63.1 dB
> 62.4 dB
THD (typ)
< -62.8 dB
< -62.8 dB
< -62.5 dB
< -62.5 dB
< -62.5 dB
< -62.5 dB
SFDR (typ), excl harm.
> 80.8 dB
> 80.5 dB
> 80.5 dB
> 78.5 dB
> 79.5 dB
> 79.3 dB
SINAD (typ)
> 61.5 dB
> 61.4 dB
> 60.5 dB
> 60.5 dB
> 59.8 dB
> 59.4 dB
ENOB (based on SINAD)
> 9.9 LSB
> 9.9 LSB
> 9.8 LSB
> 9.8 LSB
> 9.6 LSB
> 9.6 LSB
Order No
Description
Order No
Description
MC3110
MC.3110 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-16M
Option: 16 MSample memory instead of 8 MSample standard mem
MC3111
MC.3111 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-32M
Option: 32 MSample memory instead of 8 MSample standard mem
MC3112
MC.3112 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-64M
Option: 64 MSample memory instead of 8 MSample standard mem
MC3120
MC.3120 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-128M
Option: 128 MSample memory instead of 8 MSample standard mem
MC3121
MC.3121 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-256M
Option: 256 MSample memory instead of 8 MSample standard mem
MC3122
MC.3122 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-up
Additional handling costs for later memory upgrade
MC3130
MC.3130 with 8 MSample memory and drivers/SBench 5.x
MC3131
MC.3131 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-mr
Option Multiple Recording: Memory segmentation
MC3132
MC.3132 with 8 MSample memory and drivers/SBench 5.x
MC3xxx-gs
Option Gated Sampling: Gate signal controls acquisition
MC3xxx-dig
Additional 4 synchronous digital inputs per channel, incl. cable
MC3xxx-smod
Star Hub: Synchronisation of 2 - 16 boards, one option per system
MC3xxx-time
Timestamp option: Extra memory for trigger time
MC31xx-dl
DASYLab driver for MC.31xx series
MCxxxx-xmf
Extra I/O, external connector: 24 DI/O, 4 Analog out, incl. cable
MC31xx-hp
VEE driver for MC.31xx series
MC31xx-lv
LabVIEW driver for MC.31xx series
MC3xxx-cs
Synchronisation of 2 - 4 boards, one option per system
MATLAB
MATLAB driver for all MI.xxxx, MC.xxxx and MX.xxxx series.
Cab-3f-9m-80
Adapter cable: SMB female to BNC male 80 cm
Cab-3f-9f-80
Adapter cable: SMB female to BNC female 80 cm
Cab-3f-9m-200
Adapter cable: SMB female to BNC male 200 cm
Cab-3f-9f-200
Adapter cable: SMB female to BNC female 200 cm