Spectrum Brands MI.61XX 用户手册

24

MI.61xx Manual

Windows NT

Software Driver Installation

Under Windows NT the 
Spectrum driver must be in-
stalled manually. The driver is 
found on CD in the directory 
\Install\WinNTDrv. Please 
start the „Setup.exe“ pro-
gram. The installation is per-
formed totally automatically, 
simply click on the „Next“ 
button. After installtion the sy-
stem must be rebooted once 
(see picture on the right side). 
The driver is install to support 
one PCI/PXI or CompactPCI 

device. If more boards are installed in the system the configuration of the driver has to be changed. Please see the following chapter for this 
topic.

The Windows NT driver 
must be configured by the 
Driver Configuration utility 
to support more than one 
board. The Driver Configu-
ration utility is automatical-
ly installed with the driver. 
The Utility can be found in 
the start menu as „DrvCon-
fig“. 

To add a new card please follow these steps:

•  Increase the board number on top of the screen by pressing the right button
•  Change the board type from „Not Installed“ to „PCI Board“
•  Press the „Apply changes“ button
•  Press the „OK“ button
• Restart the system

If a new driver version should be installed no Spectrum board is allowed to be in use by any software. So please stop and exit all software 
that could access the boards.
When updating a system please simply execute the setup file of the new driver version. Afterwards the system has to be rebooted. The driver 
configuration is not changed.