Southbend SB1023 用户手册

For Machines Mfg. Since 8/09

Model SB1023

-31-

4.  Clean the lower column leadscrew section 

with mineral spirits, dry with a rag, and 

relubricate with any standard machine or 

multipurpose grade grease (Figure 38).

5.  Wipe the table cross feed grease fitting clean 

(Figure 39), and put two or three pumps 

of grease into it. Wipe off any grease that 

bleeds through the seams.

7.  Clean the pinion, rack, bearings, ways, and 

leadscrew with mineral spirits. Dry all parts, 

and re-lubricate with white lithium grease.

8.  With the help of your assistant, 

CAREFULLY place the table back onto the 

ways. DO NOT drop the table or you may 

put a nick in a way and ruin it permanently.

6.  With the help of another person, lift the 

table off the ways and set the table upside 

down on a workbench (Figures 40-41).