Sony Water Dispenser 2 用户手册
289
Setup Relating to Router Interface and Tally
Ch
apt
apt
er 16
E
ngin
eering Se
tup
1
In the Serial Tally menu, press [Source Assign].
The Source Assign menu appears.
In the status area, the tally types and source address set for the serial tally
port appear.
In the status area, the tally types and source address set for the serial tally
port appear.
2
In the <Serial Tally Port> group, select the port to which the setting
applies.
applies.
3
Using any of the following methods, select the port bit number.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
4
Turn the knob to select the source address.
5
Press [Source Address Set].
This confirms the setting.
Clearing a source address setting
To clear a source address setting for a particular bit
In the Source Assign menu, select the serial tally port and bit number (see steps
2
and
3
in the previous item), then press [Clear].
This clears the source address setting for the selected bit.
To clear all source address settings
In the Source Assign menu, select the serial tally port, then press [All Clear].
A confirmation message appears.
• If you select “Yes,” this clears all source address settings for the selected
A confirmation message appears.
• If you select “Yes,” this clears all source address settings for the selected
serial tally port.
• If you select “No,” the clear operation is canceled.
Knob Parameter
Adjustment
Setting
values
1
Bit No
Bit selection
1 to 128
Knob Parameter
Adjustment
Setting
values
2
Source Addr
Source address selection
1 to 1024