Sony STR-DN1040 用户手册
10
US
Description and location of parts
The indicator above the button lights
up as follows:
Green: The receiver is turned on.
Amber: The receiver is in standby
mode, and
– Either “Control for HDMI”
up as follows:
Green: The receiver is turned on.
Amber: The receiver is in standby
mode, and
– Either “Control for HDMI”
– “Pass Through” is set to “On” or
“Auto” (page 99).
– The receiver in zone 2 is turned on
Lights off when the receiver is in
standby mode and “Control for
HDMI”, “Pass Through”, “Network
Standby”, and “Bluetooth Standby”
are set to “Off”.
standby mode and “Control for
HDMI”, “Pass Through”, “Network
Standby”, and “Bluetooth Standby”
are set to “Off”.
If the indicator flashes slowly, the software
update is in progress (page 75).
update is in progress (page 75).
B SPEAKERS (page 39)
C TUNING MODE, TUNING +/–
Press TUNING MODE to operate a
tuner (FM/AM).
Press TUNING +/– to scan a station.
tuner (FM/AM).
Press TUNING +/– to scan a station.
D A.F.D./2CH, MOVIE, MUSIC (page
Operates the Bluetooth function.
H DIMMER
Adjusts the brightness of the display
panel in 3 levels.
panel in 3 levels.
I DISPLAY (page 107)
J Remote control sensor
J Remote control sensor
Receives signals from remote control.
K PURE DIRECT (page 59)
The indicator above the button lights
up when Pure Direct function is
activated.
up when Pure Direct function is
activated.
Front panel
Note