Sony ICD-PX312M 用户手册

下载
页码 132
43
GB
Oth
er R
e
cor
d
in
Op
er
ati
o
ns
4
Press 
z
REC/PAUSE to start recording.
The built-in microphone is automatically 
cut off, and the IC recorder starts 
recording sounds from the external 
microphone. 
If the input level is not strong enough, 
adjust the “话筒灵敏度” setting on the 
IC recorder (page 80).
When a plug in power type microphone 
is connected, power is automatically 
supplied to the microphone from the IC 
recorder.
5
Press 
x
(stop) to stop recording.
z
Recommended microphones
You can use the Sony ECM-CS10 electret 
condenser microphone (not supplied).
To record sound from a 
telephone or a cell phone
You can use the ECM-TL1 headphone-type 
electret condenser microphone (not 
supplied) to record sound from a telephone 
or a cell phone.
For details on how to make the connection, 
refer to the operating instructions supplied 
with the ECM-TL1 microphone.
Notes
• After you have made the connection, check 
the sound quality of the conversation and the 
recording level before you start recording.
• If the beep of the telephone or a dial tone is 
recorded, the conversation may be recorded 
with lower level of sound. In this case, start 
recording after the conversation has started.
• The VOR function (page 36) may not work, 
depending on the kind of telephone or the 
line condition.
• We assume no responsibility whatsoever for 
any inconvenience, even if you cannot 
record a conversation using the IC recorder.