Roland MA-15D 用户手册

 

fig.2

 

Connect this to L Channel Output Jack 

 

 on the right-

side unit. For the connection, use the included speaker 
cable.

 

Press this switch to turn the power on/off.

 

When the power is on, the indicator located at the side of 
the switch will light.

 

When you connect headphones to this jack, no sound 
will be heard from the speakers.

 

These adjust the tones of the bass and treble. Set to center 
to make the tones flat.

 

This adjusts the volume of devices connected to digital 
input connectors 

 

, 

 

, and LINE 1 Input Jacks 

 

.

 

This adjusts the volume of the device connected to LINE 
2 Input Jacks 

 

.

 

fig.3

 

Connect the included Power cord here (p. 17). Plug it 
firmly in, so that the cable does not accidentally become 
disconnected.

 

Switch this on to boost the bass range.

With the switch in the OFF position, sounds are output 
without the effect applied. Set to “1” to boost the bass 
range or to “2” for an even stronger effect.

 

This is the digital input connector for optic-fiber cable.

 

This switch selects digital input connector 

 

 or 

 

 on 

the rear panel. Select the connector used for the input 
signal.

 

This is the digital input connector for coaxial cable.

 

Connect this to L Channel Input Jack 

 

 on the left-side 

unit.

 

Connect your sub-woofer here. Obtain separately any 
sub-woofer you wish to connect and use.

MA-15D_egfis.fm 6 ページ ２００５年１０月３１日　月曜日　午後７時１６分