Roland BR-800 用户手册

129

Editing

Mastering

Using USB

Con

venient

Functions

Appendix

Quic

k Star

Getting Read

to Recor

Recor

ding/

Pla

ybac

Using

Eff

ects

Using

ythm

Using a Foot Switch/Expression Pedal

If you connect a foot switch (such as the separately available
BOSS FS-5U or Roland DP-2) to the FOOT SW/EXP PEDAL
jack on the rear panel, you’ll be able to control some
functions using your foot.

fig.ConnectFootSW-e.eps

The expression pedal can be used when the insert effect is
turned on.

Depending on the effect settings, it will function as follows.

• If the WAH (p. 66) TYPE is set to “PEDAL,” the

expression pedal will function as a wah pedal.

• If the PITCH SHIFTER (p. 75) TYPE is set to “PEDAL,”

the expression pedal will function as a pitch shifter
pedal.

• If WAH and PITCH SHIFTER are off, the expression

pedal will function as a volume pedal.

Here’s how to assign the function of the foot switch.

Press the [MENU] button.

Use the CURSOR [

] [

] buttons to move the

cursor to “SYSTEM,” and press the [ENTER] button.

Use the CURSOR [

] [

] buttons to move the

cursor to “FOOT SWITCH” and use the dial to

specify the function of the foot switch.

D_System_FS_Play.eps

Press the [EXIT] button a number of times to return to

the play screen.

Set the polarity switch
as shown in the following.

Foot Switch

(FS-5U etc.)

Expression Pedal

(Roland EV-5 etc.)

• Use only the specified expression pedal (Roland

EV-5, BOSS FV-500L/FV-500H; sold separately).
By connecting any other expression pedals, you
risk causing malfunction and/or damage to the
unit.

• When using an expression pedal, set the pedal’s

MIN volume to “0.”

Using an Expression Pedal

Using a Foot Switch

Value

Explanation

PLAY

The song will alternate between play
and stop each time you press the foot
switch.

REC

The foot switch will perform the
same operation as pressing the
[REC] button.

BR800_e.book 129 ページ２０１０年３月２日　火曜日　午後６時４０分