Roland BR-600 用户手册
108
Insert Effect Parameter Functions
Re
v0.10
v0.10
This creates a bell-like sound by ring-modulating the guitar
sound with the signal from the internal oscillator. The
sound will be unmusical and lack distinctive pitches.
sound with the signal from the internal oscillator. The
sound will be unmusical and lack distinctive pitches.
On/Off
OFF, ON
This parameter turns the ring modulator effect on/off.
Frequency
0 – 100
This adjusts the frequency of the internal oscillator.
Fx Level
0 – 100
Adjusts the volume of the effect sound.
Dir Level
0 – 100
Adjust the volume of the direct sound.
This produces a volume-swell effect (“violin-like” sound).
* This effect can be used in the “COSM GTR AMP”
algorithm when the MODULATION “Type” parameter is
set to “SLOW ATCK.”
set to “SLOW ATCK.”
On/Off
OFF, ON
This parameter turns the slow attack effect on/off.
RiseTme
10 – 2000 ms
This adjusts the time needed for the volume to reach its
maximum from the moment you begin picking.
maximum from the moment you begin picking.
Level
0 – 100
Adjust the volume of the slow attack sound.
This simulates the characteristics of various types of
speakers. When the output of the BR-600 is connected
directly to a mixer, etc., this can be used to create the sound
of your favorite speakers system.
speakers. When the output of the BR-600 is connected
directly to a mixer, etc., this can be used to create the sound
of your favorite speakers system.
On/Off
OFF, ON
This parameter turns the speaker simulator effect on/off.
Type
Selects the type of speaker that will be simulated.
“On Mic” simulates the sound when a dynamic microphone
is used, and “Off Mic” simulates the sound when a
condenser microphone is used.
is used, and “Off Mic” simulates the sound when a
condenser microphone is used.
■
With “COSM GTR AMP,” “COSM COMP
GTR,” or “VO+GT AMP” algorithms
fig.03-360
■
With “COSM BASS AMP” or “COSM
COMP BSS” algorithms
fig.03-370
Mic Set
CENTER, 1 – 10 cm
This simulates the microphone position. “CENTER”
simulates the condition that the microphone is set in the
middle of the speaker cone. “1–10 cm” means that the
microphone is moved away from the center of the speaker
cone.
simulates the condition that the microphone is set in the
middle of the speaker cone. “1–10 cm” means that the
microphone is moved away from the center of the speaker
cone.
Mic Level
0 – 100
Adjusts the volume of the microphone.
Dir Level
0 – 100
Adjust the volume of the direct sound.
Ring Modulator
Slow Attack
Speaker Simulator
Comments
Cabinet
A setting suitable for CLEAN
On Mic
Roland JC-120 Simulation
10 inch
12 inch
12 inch (two units)
12 inch (four units)
Small open-back enclosure
Open-back enclosure
Large Sealed enclosure
Large sealed enclosure
Large dual stack
On Mic
On Mic
On Mic
Off Mic
On Mic
Off Mic
OnMic
Off Mic
On Mic
Off Mic
Off Mic
Open-back enclosure
Open-back enclosure
Open-back enclosure
Open-back enclosure
Open-back enclosure
Large sealed enclosure
Large sealed enclosure
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (four units)
12 inch (four units)
A setting suitable for CLEAN
A setting suitable for MATCH
A setting suitable for MATCH
A setting suitable for BG LEAD
A setting suitable for BG LEAD
SMALL
MIDDLE
JC-120
TWIN
twin
MATCH
match
BG STK
bg stk
MS STK
ms stk
METAL
A setting suitable for MS
A setting suitable for MS
On Mic
Off Mic
Open-back enclosure
Open-back enclosure
12 inch (two units)
12 inch (two units)
A setting suitable for VO DRV
A setting suitable for VO DRV
VO DRV
vo drv
Microphone
Setting
Speaker
Unit
SP Simulator
Type
Comments
Microphone
Setting
Speaker
Unit
SP Simulator
Type
Cabinet
A setting suitable for AMG
A setting suitable for AMG
On Mic
15 inch (two units)
15 inch (two units)
10 inch (eight units)
Large sealed enclosure
Large sealed enclosure
Off Mic
On Mic
Off Mic
Large sealed enclosure
Large sealed enclosure 10 inch (eight units)
A setting suitable for AC
A setting suitable for AC
AC
ac
AMG
amg
BR600_e2 108 ページ ２００６年４月１７日 月曜日 午前９時３分