Roland BR-600 用户手册
22
Panel Descriptions
Re
v0.10
v0.10
1. MIC2 jack (TRS 1/4” phone type)
* If the connection has been made to the GUITAR/BASS and
the MIC2 jacks, the MIC2 jack is given priority.
* Connecting a mic to MIC2 switches off the onboard stereo mic.
2. MIC1 jack (TRS 1/4” phone type)
* Connecting a mic to MIC1 switches off the onboard stereo mic.
The pin assignment for the MIC1 and the MIC2 jack is as
shown below.
shown below.
3. LINE IN jack (Stereo mini type)
This input jack accepts analog audio signals (p. 34).
Connect the output of CD players or other portable audio
players or other audio equipment.
Connect the output of CD players or other portable audio
players or other audio equipment.
4. LINE OUT jack (RCA Pin type)
These jacks output analog audio signals. You can connect
external audio equipment (e.g. a stereo amp) to this jack, or
connect an CD recorder or other such device to this jack for
analog recording of the BR-600's output (p. 90).
external audio equipment (e.g. a stereo amp) to this jack, or
connect an CD recorder or other such device to this jack for
analog recording of the BR-600's output (p. 90).
5. USB connector
This is the connector for connecting your computer to the
BR-600 with a USB cable (p. 162).
BR-600 with a USB cable (p. 162).
6. FOOT SW/EXP PEDAL jack
This is an input jack for connecting a separately sold foot
switch (BOSS FS-5U, Roland DP-2) or expression pedal
(Roland EV-5, BOSS FV-500L/FV-500H).
switch (BOSS FS-5U, Roland DP-2) or expression pedal
(Roland EV-5, BOSS FV-500L/FV-500H).
• When the foot switch is used, you can start/stop
playback, punch in/out, and more.
• When an expression pedal is used, you can control the
depth of insert effects with your foot.
7. POWER switch
This is the power switch. It turns the power of the BR-600
on/off (p. 31).
on/off (p. 31).
8. DC IN (AC Adaptor) jack
Connect the supplied AC adaptor (PSA series) to this jack.
You can purchase a PSA adaptor at musical instrument
retailers.
retailers.
9. Cord Hook
Wrap the cable around this hook so that the AC adaptor
cable is not pulled out accidentally (p. 29).
cable is not pulled out accidentally (p. 29).
10. Security Slot (
)
http://www.kensington.com/
Rear Panel
10
4
5
6
7
8
9
2
3
1
• You must use only the PSA series AC adaptor.
Use of any other adaptor may cause overheating
or malfunctions.
or malfunctions.
• If the AC adaptor is disconnected during
operation, your important recorded data may be
lost.
lost.
BR600_e2 22 ページ ２００６年４月１７日 月曜日 午前９時３分