Roland BR-600 用户手册

Re
v0.10

 

By default, the insert effect is inserted immediately after the 
input source. The reason for this is to allow for the effects-
processed (wet) sound to be recorded and monitored. 
However, sometimes you want to change the connection 
order. 

On the BR-600, you can accommodate a wide variety of 
situations by changing the point to which the insert effects 
are connected.

Follow the procedure below to change where insert effects 
are connected.

 

fig.03-100

 

The sound is monitored and recorded after it passes 
through the insert effect. Normally you will use the BR-600 
with this setting.

 

fig.03-110

 

The sound is monitored through the insert effect but is 
recorded without the effect (dry). Use this when you wish 
to try out various effects after recording. 

 

fig.03-120

 

The insert effect can be applied to the playback of a track (or 
pair of tracks). Use this when you wish to try out effects 
after recording the dry sound, or when you wish to apply 
effects only to a specific track.

 

fig.03-130

 

The insert effect can be applied to the playback of a Rhythm.

 

fig.03-140

 

Use this when you wish to apply effects to the entire song, 
such as when adjusting the tone or applying a special effect 
during mixdown.

 

fig.03-150

 

■

 

■

 

■

 

■

 

■

BR600_e2 95 ページ ２００６年４月１７日　月曜日　午前９時３分