Rane Music Mixer SM 26S 用户手册

Manual-4

©Rane  Corporation    10802  47th  Ave.  W.,    Mukilteo  WA  98275-5098  USA    TEL  425-355-6000    FAX  425-347-7757    WEB  www.rane.com

Since numerous applications exist for the SM 26S, no single 

set of operational procedures control its use. The SM 26S 

Swiss Army Mixer RaneNote (included) explores the many 

configurations of the SM 26S in depth, and you should 

peruse it for applications information.

There exist within the SM 26S some signal routing options, 

requiring removal of the top cover to move some jump-

ers. This must only be done with the power off by qualified 

service personnel.

If an SM 26S needs to have an additional set of inde-

pendent outputs, as in a 2x4 stereo distribution amplifier 

(see Swiss Army Mixer, Figure 10), the LEFT and RIGHT 

MIX OUTPUTS can be used in addition to the 6 MONO 

OUTS. Normally, the LEFT and RIGHT MIX OUTPUTS 

produce the sum mix of all 6 LEVEL and PAN controls. To 

break any channel away from the Mix Output bus, internal 

jumpers have been provided. These are located behind the 

MIX/PAN controls for each channel. J3 connects MONO 

OUT 1 to the mix bus. J6 connects MONO OUT 2, J9 

connects MONO OUT 3, and so on — see the board 

layout.

SHIP POSITION: SEND CHANNEL OUTPUT TO THE MIX BUS

CHANGE JUMPER TO DISCONNECT AND ONLY ROUTE TO THE MONO OUT