Ramsey Electronics RRW1A 用户手册
RRW1A
• 1
Ramsey Electronics Model No. RRW1A
Have you ever been frustrated with the range of your remote
controls? Tired of having to bounce your IR remote off of
ceilings and walls? Do you want to run your system from
another room or floor? Here is the answer to your prayers!
Extend the range of your remote controls through walls, around
corners, and even from outdoors!
controls? Tired of having to bounce your IR remote off of
ceilings and walls? Do you want to run your system from
another room or floor? Here is the answer to your prayers!
Extend the range of your remote controls through walls, around
corners, and even from outdoors!
•
IR Receiver module with sensitive element can receive your
remote control’s signal up to 36 feet away before re-broadcasting
it wirelessly!
remote control’s signal up to 36 feet away before re-broadcasting
it wirelessly!
•
The separate receiver (RRW1B) reconstitutes the radio signal
using a PIC micro-controller to restore noisy or weak signals and
then re-broadcasts the IR remote’s signal to your components via
a wired high-efficiency IR LED.
using a PIC micro-controller to restore noisy or weak signals and
then re-broadcasts the IR remote’s signal to your components via
a wired high-efficiency IR LED.
•
Extend the range of your remote control to greater than 100 feet
wirelessly beyond the receive range of the IR sensor. Greater than
300 feet with a directional antenna pair (available separately).
wirelessly beyond the receive range of the IR sensor. Greater than
300 feet with a directional antenna pair (available separately).
•
Works with almost any remote control (38 kHz carrier), does not
need to be programmed.
need to be programmed.
•
Operate from 8V to 16V AC or DC. Use our AC125 wall adapters
for long operation.
for long operation.
•
LED indicator lets you know when you are receiving an IR signal
or not.
or not.