RATOC Systems U2SCXU 用户手册
Windows
44
7)If you selected IBM-PC/AT FDISK format at step 6), the message box
saying [You should create partition next] appears. Click [OK]. You
will see the screen shown in step 5) and select [Create Partition] from
the [Edit] menu. Finally, you will see the screen below. Select [File
System] from the list box and set Partition size, using the slider bar.
Click [OK] to create partition. If you selected Super FD format at step 6),
you will see a screen similar to the following. Select [File System] from the
list box and click [OK].
saying [You should create partition next] appears. Click [OK]. You
will see the screen shown in step 5) and select [Create Partition] from
the [Edit] menu. Finally, you will see the screen below. Select [File
System] from the list box and set Partition size, using the slider bar.
Click [OK] to create partition. If you selected Super FD format at step 6),
you will see a screen similar to the following. Select [File System] from the
list box and click [OK].
8)Remove the U2SCXU from the PC as described in Chapter 2-7 and then
turn off the SCSI device and reconnect the U2SCXU and turn on the SCSI
device for your changes to take effect.
If you are using a removable media, the media will be ejected to take effect.
turn off the SCSI device and reconnect the U2SCXU and turn on the SCSI
device for your changes to take effect.
If you are using a removable media, the media will be ejected to take effect.
Slider Bar