Chamberlain PIR2300R 用户手册
Carton Inventory
Overview
The Wireless Pedestrian & Vehicle Sensor is a
Passive Infra-Red sensor that detects movement of
people and vehicles, while allowing small animals to
pass through undetected. Each PIR Motion Sensor
has its own unique ID, for a secure radio link.
Base Station (not provided) can learn the signals of
up to four PIR Motion Sensors. The Base Station will
give a single beep for the first Sensor that it learns, a
double beep for the second, and so forth. Additionally,
multiple Base Stations can work with the same PIR
Motion Sensor to sound in different places.
Passive Infra-Red sensor that detects movement of
people and vehicles, while allowing small animals to
pass through undetected. Each PIR Motion Sensor
has its own unique ID, for a secure radio link.
Base Station (not provided) can learn the signals of
up to four PIR Motion Sensors. The Base Station will
give a single beep for the first Sensor that it learns, a
double beep for the second, and so forth. Additionally,
multiple Base Stations can work with the same PIR
Motion Sensor to sound in different places.
PIR Motion Sensor
Assembly & Test
Assembly & Test
Step 1
Attach PIR Motion Sensor box to mounting plate with
large silver screw. Tighten screw until PIR Motion
Sensor stays in place when repositioned.
large silver screw. Tighten screw until PIR Motion
Sensor stays in place when repositioned.
Model PIR2300R
Wireless Pedestrian & Vehicle Sensor
Passive Infra-Red (PIR) Motion Sensor
1
Swivel Bushing
Mounting Plate
Sun/Rain Shield
®
PIR Sensor
Antenna
Switch Settings
Step 2
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
LED light will flash.
batteries recommended for colder environments.)
LED light will flash.
Switch #1
Switch #2
Test
Button
Button
Switch #1:.
Switch #2:
ON
OFF
1
2
OFF
Low Sensitivity
ON
High Sensitivity
(Default)
(Default)
OFF
15' Detection Range
ON
30' Detection Range
(Default)
(Default)
NOTE: To avoid unwanted detection of small animals
move Switch #2 to OFF.
move Switch #2 to OFF.