Yahee Revo Elite RETRT2812-1 用户手册
USER’S MANUAL
■ When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type
synchronization.
synchronization.
☞
NOTE
■ When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
•
MOTION DET :This product has a feature that
allows you to observe movement of objects in
8 different areas on the screen, and the
words 'MOTION DETECTED' appear on the
screen when movement is detected.
allows you to observe movement of objects in
8 different areas on the screen, and the
words 'MOTION DETECTED' appear on the
screen when movement is detected.
Activity can be monitor more efficiently.
1) When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the arrow
indicates 'MOTION DET’.
2) Set up the mode using the Function Setup switch.
- SENSITIVITY: You can select up to 8 MD areas. When SENSITIVITY number is high, motion
detection sensitivity is increased to recognize even small movement.
- AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is to be used.
- XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- FILL→SET: Fills in a selected MD area. The color of the area can be selected from brown, orange,
blue, cyan, green, yellow, magenta and red.
- RETURN: Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
1) When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the arrow
indicates 'MOTION DET’.
2) Set up the mode using the Function Setup switch.
- SENSITIVITY: You can select up to 8 MD areas. When SENSITIVITY number is high, motion
detection sensitivity is increased to recognize even small movement.
- AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is to be used.
- XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- FILL→SET: Fills in a selected MD area. The color of the area can be selected from brown, orange,
blue, cyan, green, yellow, magenta and red.
- RETURN: Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
•
PRIVACY: Mask an area you want to hide on the screen.
PR VACY AREA SETUP
1 AREA AREA1
2 MODE OFF
3 MASK COLOR GREEN
4 MASK TONE 1
5 TOP
2 MODE OFF
3 MASK COLOR GREEN
4 MASK TONE 1
5 TOP
39
6 BOTTOM
79
7 LEFT
13
8 R GHT
52
9 RETURN
MOT ON DET
1 SENS T V TY
AREA1
2 AREA MODE
ON
3 SEL POS
L TOP
4 XPOS
3
5 YPOS
5
6 F LL → SET
7 RETRUN
.
.
.
.
.
.
.
.
.
.
.
.
.
-
18