VXi VT1422A 用户手册
358 VT1422A Command Reference
[SENSe]
[SENSe:]REFerence:CHANnels
[SENSe:]REFerence:CHANnels (@<ref_channel>),(@<ch_list>)
causes channel
specified by <ref_channel> to appear in the scan list just before the channel(s)
specified by <ch_list>. This command is used to include the thermocouple reference
temperature channel in the scan list before other thermocouple channels are measured.
specified by <ch_list>. This command is used to include the thermocouple reference
temperature channel in the scan list before other thermocouple channels are measured.
Parameters
Comments
•
Use SENS:FUNC:TEMP to configure channels to measure thermocouples.
Then use SENS:REF to configure one or more channels to measure an
isothermal reference temperature. Now use SENS:REF:CHAN to group the
reference channel with its thermocouple measurement channels in the scan list.
isothermal reference temperature. Now use SENS:REF:CHAN to group the
reference channel with its thermocouple measurement channels in the scan list.
•
If thermocouple measurements are made through more than one isothermal
reference panel, set up a reference channel for each. Execute the
SENS:REF:CHAN command for each reference/measurement channel group.
SENS:REF:CHAN command for each reference/measurement channel group.
•
Related commands: SENS:FUNC:TEMP, SENS:REF
•
*RST Condition: No channels are linked to references.
•
Send with VXIplug&play Function: hpe1422_cmd(...)
Usage
SENS:FUNC:TEMP TC,E,.0625,(@108:115)
E type TCs on channels 8 through 15
SENS:REF THER,5000,1,(@106)
Reference ch is thermistor at channel 6
SENS:REF RTD,85,.25,(@107)
Reference ch is RTD at channel 7
SENS:REF:CHAN (@106),(@108:111)
Thermistor measured before chs 8 - 11
SENS:REF:CHAN (@107),(@112:115)
RTD measured before chs 12 - 15
[SENSe:]REFerence:CHANnels:POST
[SENSe:]REFerence:CHANnels:POST (@<ref_channel>),(@<ch_list>)
links
the thermocouple channel(s) specified by <ch_list> to the temperature reference
(thermistor) channel specified by <ref_channel>. The reference channel must be on
the same VT1529B as the thermocouple channels.
(thermistor) channel specified by <ref_channel>. The reference channel must be on
the same VT1529B as the thermocouple channels.
The ROUT:SEQ:DEF command must be used to include the thermocouple channels
in the scan list.
in the scan list.
This command is valid only on the VT1529B and is available with VXIplug&play
driver revision A.01.09 or later (revision A.01.06 or later of hpe1422_32.dll).
driver revision A.01.09 or later (revision A.01.06 or later of hpe1422_32.dll).
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
ref_channel
channel list (string)
100 - 163
none
ch_list
channel list (string)
100 - 163
none