Vornado Essential Fabric Steamer 用户手册

The cleaning steps below are required to maintain maximum performance of 

your unit.  Cleaning is very important to maintain Limited Warranty Coverage 

and is necessary every 3 to 6 months depending on the mineral content of 

your water.

1. Press the Power Button to turn Off 

and unplug unit. Let unit cool at 

least 10 minutes, then remove Water 

Tank Lid and empty all water.

2. Mix contents of 1 Cleaning Crystal packet with 4 oz. of water.

3. Pour solution into Water Tank and replace Water Tank Lid. Plug in unit, and 

press the Touch Sensor Power Button On.  

WARNING: During cleaning, place unit where steam can be emitted safely. 

Steam should be directed away from objects or surfaces that may be affected 

by steam exposure.

4. Run unit until water level drops to the Min fill line on Water Level Window, or 

until steam is no longer emitted. Touch Power Button Off and unplug unit. 

Let unit cool at least 10 minutes, then remove Water Tank Lid and empty.

5. Rinse unit by filling Water Tank with water to the Max fill line on Water Level 

Window. Swish around water inside the Water Tank, then empty all rinse 

water.  The unit is now ready for use.

6. Any other servicing should be performed by an authorized service represen-

tative.

Cleaning

(2 included)