VIZIO TL-WR641G 用户手册

 

 

- 69 - 

)

If the above configuration takes effect, to configure to the router by typing 

   

(the router’s LAN IP address: Web Management Port) in the address field of the Web browser. 

3)  Login to the router, click the “Forwarding” menu on the left of your browser, and click 

the "Virtual Servers" submenu. On the "Virtual Server" page, click Add New, then on 

the “Add or Modify a Virtual Server” page, enter “80” into the blank behind the “Service 

Port”, and your IP address behind the IP Address, assuming 192.168.1.188 for an 

example, remember to “Enable” and “Save”. 

 

Figure A-8 

 

Figure A-9 

1)  Make sure the "Wireless Router Radio" is enabled. 

2)  Make sure that the wireless stations' SSID accord with the router's SSID. 

3)  Make sure the wireless stations have right KEY for encryption when the router is 

encrypted. 

4)  If the wireless connection is ready, but you can’t access the router, check the IP 

Address of your wireless stations.