Viper 5706V 业主指南

31

© 2013 Directed. All rights reserved.

Feature Details

31

Full Silent Arm Protection

Sensor Warn-away, Sensor Full Trigger and Point of Entry activations 
will only send messages to the remote, with parking light flash and 
siren outputs defeated.

Sensor Warn-away Messages

When the remote receives a Sensor Warn-away message it emits 
10 beeps (if on) and displays a sensor zone specific 

 

text for 30 seconds. Warn-away messages cannot be reviewed or 
displayed in reports.

Full Trigger Messages

A Full Trigger message generates a Full Trigger output of siren tones 
and zone specific 

 text followed by an alert that consists of 

one long beep per minute for 10 minutes.
To stop the output and alert, press a command button to perform a 
command, or Press the 

button. 

Emergency Override

The following procedure disarms the system when a programmed re-
mote is not available.  Number of presses__________

1.  Turn the ignition On. 
2.  Press the control button on the Control Center the correct 

number of times (the default is one press). 

3.  After a few seconds the siren output ceases and the system 

is disarmed.

Note

As a precaution, if programmed for Passive Arming or Auto 
re-arming the system should be placed into Valet Mode until 
a remote is available .