Viper 5706V 业主指南

36

© 2013 Directed. All rights reserved.

36

controls. When the Remote start runtime expires the engine shuts off, 
the  

 message is sent to the remote control and the 

countdown timer restarts. Smart Start is exited after the final start.

Note

The temperature and battery thresholds can be changed by 
an authorized Directed dealer if a higher or lower threshold 
is desired.

Temperature Reporting

During Remote start the vehicle interior is checked regularly for tem-
perature changes. If a change in temperature is detected this report 
will be sent to the remote for display. Each time the remote receives 
this report it will beep, update, and display the newest temperature 
information using the Temperature Gauge icon. 

Note

Temperature report must be turned on by an authorized Di-
rected dealer.

Remote Start Time-out Alert

During remote start a message is sent three minutes before and again 
at one minute before the engine turns off. The  

 text plays 

with tones as an alert to reset the runtime if desired.

Pit Stop Mode

To exit vehicle with engine running

The system keeps the engine running during short trips into the house 
or convenience store. To perform Pit Stop:

1.  With the engine running, set the parking brake and release the 

foot brake.