Viking Huskylock 936 用户手册

Select the fabric type with the fabric selection button         . 

The recommended setting then appears on the Sewing Advisor.

The message “Not advised” appears when the setting is not recommended. 

See “2-8. Table of fabric type (page 15)”.

Set up your Huskylock™ as advised by the Sewing Advisor. 

The machine is now ready for sewing.                                                                                  

Note: Fabric and thread may vary. Always test sew before starting on your garments.

Note: The stitch length and the differential ratio are adjusted automatically in  accordance with the 

displayed numbers. 

Manual Mode allows you to alter the auto setting. Your own setting can be stored in Memory 

Mode. See below.

Manual setting as follows : 

1. Enter Manual Mode by pressing the cursor button         .

2. The changeable number starts to blink.

3. Move by means of the cursor button          to the number to be changed.

4. Selected number can be altered by pressing plus or minus button              .

5. Continue pressing these buttons until the desired numbers appear.

6. To save this setting, store it in Memory Mode.

Note: The stitch length and the differential ratio are adjusted automatically in accordance with the 

displayed numbers. 

The other settings may be adjusted with each dial or knob.

—12—

Example: If you press the stitch selection button 3 times, the following will be displayed: