VillaWare FPVLFPSL01 用户手册

instructions for use

BEFORE USING YOUR FOOD PROCESSOR
Follow the assembling instructions listed below before using your Villaware

™

Food Processor:

BE SURE THAT THE ELECTRIC CORD IS UNPLUGGED.

THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION WHEN
HANDLING THEM.

• Before assembling your

food processor , make

sure it is unplugged and

placed on a dry , level

surface. Place the bowl,

without the cover , over

the drive shaft on the

motor base. (Figure 1)

• If you are going to use

one of the discs, place

the attachment rod over

the drive shaft (figure

4a). Then place the disc

on top of the attachment

rod with the desired

side facing up (slicing,

shredding or grating)

(figure 4b).

• Attach the cover onto

the bowl so that the

food chute is in front

of the bowl above the

switch control (Figure 5).

Turn counter clockwise

until the arrow on the

cover is aligned with the

locked symbol on the lid

“ ”.

• Rotate the bowl until it

fits evenly on the base.

Hold handle and turn the

bowl counter clockwise

until it locks firmly into

place (Figure 2). The

handle will be facing

forward and aligned with

the switch control. Make

sure the arrow on the

base is aligned with the

locked symbol “ ”.

• If you are going to use

the chopping blade; place

it over the drive shaft,

rotating it slightly until it

drops into place (Figure 3).

THE BLADES AND

DISCS ARE SHARP.

USE CAUTION WHEN

HANDLING THEM.

Figure 4a

Figure 1

Figure 2

Figure 3

Figure 5

Figure 6

• Push down on food

pusher lid until it clicks,

indicating that the cover

is locked into place.

Figure 4b

NOTE:

Each time you re-assemble your food processor , be sure to attach the bowl first

and lock it into position . Then attach the cover.