Vestax Professional Mixing Controller PCV-002 用户手册
角4点のネジを外す。
マルチケーブル
コネクターを抜く
コネクターを抜く
6
■HOW TO REMOVE THE TOP PANEL
○
1
Remove all fader knobs and the 4screws which
fix the top panel.(see fig.A)
○
2
Remove the top panel.
■HOW TO CHANGE THE FADER UNIT
○
1
Remove the screws on the fader panel.(see fig.B)
○
2
Remove the fader unit from position in mixer.
○
3
Carefully remove the multi-cable connector from
fader unit.(see fig.C)
fader unit.(see fig.C)
○
4
Attach multi-cable connector to new fader unit.
○
5
Position the fader unit carefully and secure with
screws.
screws.
You can replace the CF unit with "CF-RUS",
"CF-R" or "CF-PCV".
■HOW TO REPLACE THE CF UNIT WITH "CF-PCV"
When the fader unit is replaced, please see fig.C.
Place the fader unit in the proper position and fix it
with two screws.(fig.D-○
b
)
How to change the fader unit.
driver
driver
fig.D
CF-RUS or CF-R
CF-PCV
CF-PCV
fig.A
fig.C
fig.B
Remove the multi-cable
connector from fader unit.
connector from fader unit.
Remove four scews.
CAUTION
There is a swith for "CF-PCV" unit. When "CF-
PCV" unit is installed, set the switch to "PCV"
mode.
PCV" unit is installed, set the switch to "PCV"
mode.
CAUTION
When the fader unit is replaced, do not loosen
the screws with marking.
the screws with marking.