Uniden UDW10055 用户手册

8

1.  Attach the camera bracket to the mounting screw.

Tighten it a few turns, then turn the camera to face the 
direction you want.

2.  Tighten the camera brace up 

against the bracket to secure it 
into place.

3.  Unlock the mounting post by 

turning the wingnut to the left 
a few turns.

4.  Set the mounting post to the 

correct angle, then tighten the 
wingnut until the post is locked 
into place.

If there is too much glare in the camera, you can move the sun shield forward to provide more 
shade for the lens. If the top of the picture is cut off, try moving the sun shield back.
To adjust the sun shield, loosen the bolts on the side of the mounting bracket (see page 7). Slide 
the sun shield forward or back, then check the picture in the receiver display. When the picture is 
satisfactory, tighten the bolts again.  

Loosen the 

wingnut to 

unlock the 

mounting 

post.

Attach the camera 

to the mounting 

screw and turn it 

to the desired 

direction.

Adjust the post to 

the correct angle, 

then tighten the 

wingnut to lock the 

post into place.

Tighten the brace against 

the camera to

secure it

in place.