Univex UDB275MP 用户手册

English

UDB275MP

Adjusting the volume

Turning the [ROTARY] knob clockwise increases

the volume; turning it counterclockwise decreas-

es the volume.
"VOLUME:XX" will be shown in the display while

“VXX” will be displayed in the message knob

indication where“XX” is the volume level from 0

(minimum) to 33 (maximum).

∗

The factory default setting for volume is "17".

Radio/CD (CD-DA)/AUX Mode:

Main display Clock display Main display

Note: Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 3 (unfold).

7. OPERATIONS

CAUTION

Basic Operations

Be sure to lower the volume before switch-

ing off the unit power or the ignition key. The

unit remembers its last volume setting. If

you switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

Turning on/off the power

Note:

Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too much, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.
2. The illumination of the display on the unit light

up. The unit automatically remembers its last

Operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1 second

or longer to turn off the power for the unit.

Selecting a mode

1. Press the [SRC] button to change the Opera-

tion mode.

2. Each time you press the [SRC] button, the Op-

eration mode changes in the following order:

Radio mode CD mode (USB mode)

AUX mode Radio mode...

∗

Once selected, the preferred display becomes the

display default. When a function adjustment such

as volume is made, the screen will momentarily

switch to that function’s display, then revert back

to the preferred display several seconds after the

adjustment.

The 3-digit message knob indication will display

the correspondence mode as the following:
Radio mode :
CD mode   :
USB mode   :
AUX mode   :

Notes:

If the CD mode is selected when no disc is inserted,

the display shows “NO DISC”.

If no USB drive is inserted, USB mode will not be

displayed.

Switching the display

1. Press the [DISP] button to select the desired

display.

2. Each time you press the [DISP] button, the

display switches in the following order:

MP3/WMA (Disc and USB) Mode:

Main-1 display (Track No., play time)

Main-2 Display (Folder No., Track No.)

Title Display Clock Display

Main-1 Display...

Displaying additional buttons

1. Push the [PUSH OPEN] cover to open the

ﬂip down cover that consists of the following

buttons:

      [DIRECT]
      [BAND]
      [A-M]
      [Z-EHCR]
      [ADJ]
      [ISR]