XiNCOM X16-R 用户手册

 

 

Page 14 

 

 

1.  Ensure that the MULTI-WAN GATEWAY and any DSL/Cable modem(s) are powered-OFF. 

Leave the modem or modems connected to their data lines. 

2.  Connect the Broadband modem(s) to the MULTI-WAN GATEWAY. 

•  If using only one (1) Broadband modem, connect it to port 1. 
•  Use the cable supplied with your DSL/Cable modem. If no cable was supplied, use a standard 

cable. 

3.  Use standard LAN cables to connect PCs to the LAN ports on the MULTI-WAN GATEWAY.  

•  Both 10BaseT and 100BaseT connections can be used simultaneously. 
•  If you need to connect the MULTI-WAN GATEWAY to another Hub, just use a standard LAN 

cable to connect any LAN port on the MULTI-WAN GATEWAY to a standard port on another 
hub. Any LAN port on the MULTI-WAN GATEWAY will automatically act as an "Uplink" port 
when required. 

•  If devices are connected to the 2 WAN ports (1 and 2), the remaining ports (3 to 16), are LAN 

ports. 

4. Power-Up 

•  Power-on the Cable or DSL modem(s). 
•  Connect the supplied power cord to the MULTI-WAN GATEWAY and power-up. 

5.  Check the LEDs 

• The 

Power LED should be ON.