XiNCOM X16-R 用户手册

 

 

Page 26 

•  User Name – Enter the PPPoE user name assigned by your ISP. 
•  Password – Enter the PPPoE password assigned by your ISP. 
•  Verify Password – Re-enter the PPPoE password assigned by your ISP. 

•  Specified Fix IP Address – If you have a fixed IP address, enter if here. 

Otherwise, this field should be left at 0.0.0.0.  

•  Assigned Host Name –This field is used by a Host to uniquely associate 

an access concentrator with a particular Host request. 

•  Auto Dialup (connect-on-demand) – If set to Enable, a connection will be 

established whenever outgoing WAN traffic is detected. If not enabled, 
you must establish a connection manually. 

•  Disconnect after Idle – This determines when an idle connection will be 

terminated. Enter the required time period. (-1: Always on) 

•  Echo Time – This determines how often an Echo request is sent to the 

PPPoE server. The Echo request is used to determine if the connection is 
still alive. Normally, there is no need to change the default value. 

•  Echo Retry – The number of times the Echo request will be sent, if there 

is no response to the first request. Normally, there is no need to change 
the default value. 

This displays the current connection status for each session. 

 

This Advanced PPTP screen is only useful if using the PPTP connection method.