XiNCOM X16-R 用户手册

 

 

Page 30 

•  Binding WAN Port / Session – Select Enable if you wish to associate this 

PC with a particular PPPoE session. All traffic for that PC will then use the 
selected PPPoE port and session. 

•  Binding Method – Suppose your PC is bound to WAN1 port and you select 

“Strict Binding.”  If WAN1 port is disconnected, your packets cannot go 
through another WAN port, if it is still alive. If you select “Loose Binding” then 
if WAN1 port becomes disconnected, your packets will automatically go to 
another WAN port, if it is alive. 

•  Select WAN Port / Select PPPoE session – If the Binding Method setting 

above is set to Enable, select the desired Port and Session. Otherwise, ignore 
these settings. 

Note: Multiple PPPoE sessions are defined on the Advanced PPPoE screen. 

•  Add – Use this to add a new entry to the database, using the data shown on 

screen. 

•  Delete – Click this to delete the selected entry. 
•  Update – After making the desired changes, use this to update the selected 

entry  

•  Reset – Reverse any changes you have made since loading the data from the 

MULTI-WAN GATEWAY. 

This table shows the current bindings. 

 

 

 

This section is only relevant if your LAN has other Routers or Gateways. 
•  If you don't have other Routers or Gateways on your LAN, you can ignore the Static Routing 

page completely. 

•  If your LAN has other Gateways and Routers, you must configure the Static Routing screen as 

described below. You also need to configure the other Routers.