XiNCOM X16-R 用户手册

 

 

Page 57 

 

 

•  Remote Upgrade – If enabled, you can use the supplied Windows 

utility to remotely upgrade the firmware. If not enabled, the upgrade 
must be performed by a PC on the LAN. 

•  Remote Setup – If enabled, access to the web-based interface is 

available via the Internet (See below for details). If not enabled, access 
is only available by a PC on the LAN. 

•  Access port – The port number used when connecting remotely. The 

default port number is 8080. 

•  Allowed Remote IP – Remote access is only available to the IP 

address entered here. 

1.  Leaving these fields blank (0.0.0.0 ~ 0.0.0.0), will allow access by 

all PCs. 

2.  These addresses must be Internet IP addresses; not addresses on 

the local LAN. 

3.  To specify a single address, enter it in both fields. 

Administrator 
Password 

 You can modify the device password in this field. The default entry is  

 “ “ (no password).