XiNCOM X16-R 用户手册

Page 77

Appendix C

Troubleshooting

Overview

This chapter covers some common problems that may be encountered while using the MULTI-WAN
GATEWAY and some possible solutions to them. If you follow the suggested steps and the MULTI-
WAN GATEWAY still does not function properly, contact your dealer for further advice.

General Problems

Problem 1:

Can't connect to the MULTI-WAN GATEWAY to configure it.

Solution 1:

Check the following:

• The MULTI-WAN GATEWAY is properly installed, LAN connections are OK,

and it is powered ON. By default, Port 1-2 of this device are WAN ports, the
others are LAN ports. Otherwise you have changed Maximum WAN ports.

• Ensure that your PC and the MULTI-WAN GATEWAY are on the same

network segment. (If you don't have a router, this must be the case.)

• If your PC is set to "Obtain an IP Address automatically" (DHCP client), restart

it.

• If your PC uses a Fixed (Static) IP address, ensure that it is using an IP

Address within the range 192.168.1.2 to 192.168.1.254 and thus compatible
with the MULTI-WAN GATEWAY’s default IP Address of 192.168.1.1.
Also, the Network Mask should be set to 255.255.255.0 to match the MULTI-
WAN GATEWAY. In Windows, you can check these settings by accessing
Control Panel-Network to check the Properties for the TCP/IP protocol.