Shindaiwa 68006-94310 业主指南

23

Whenever the unit will not be used for 

30 days or longer, use the following 

procedures to prepare if for storage:


Clean external parts thoroughly.



Drain all the fuel from the carbure-

tor and the fuel tank.

IMPORTANT!

All stored fuels should be stabilized 

with a fuel stabilizer such as StaBil™.

To remove the remaining fuel from the 

fuel lines and carburetor and with the 

fuel drained from the fuel tank… 
1.  Prime the primer bulb until no more 

fuel passes through.

2.  Start the engine and idle until it 

stops running.

3.  Repeat Steps 1 and 2 until the en-

gine will no longer start.

CAUTION!
Gasoline stored in the carburetor 

for extended periods can cause 

hard starting and could also lead to 

increased service and maintenance 

costs.

Long Term Storage



Remove the spark plug and put a 

small amount of 2-cycle mixing oil 

(1-2 cm

3

) into the cylinder through 

the spark plug hole. Slowly pull 

the recoil starter 2 or 3 times so oil 

will evenly coat the interior of the 

engine. Reinstall the spark plug.



Before storing the unit, repair or 

replace any worn or damaged parts.



Remove the air cleaner element 

from the carburetor and clean it as 

described on page 17, then reas-

semble the element.



Clean the exterior of the unit thor-

oughly.



Store the unit is a clean, dust-free 

area.